The post Steam Turbine Component Manufacture & Repair Capabilities first appeared on ユースカジノ 入金不要ボーナス.

1. High Pressure (HP) Nozzle Block

1.1. The original intention of the rerate plan was to blank off nozzles to reduce flow area; however, given the need to re-blade the 1st stage wheel due to damage it became justifiable to manufacture a new HP Nozzle Block with a reduced nozzle height.

1.2. The new HP Nozzle Block was manufactured with the same number of nozzles as the original (i.e. 66) but with the nozzle height reduced to .462”.

Figure 1: New HP Nozzle Block Manufactured

1.3. A new windage shield was also manufactured to maintain the design clearance to the OD of the 1st stage wheel.

1.4. The new Upper Half HP Nozzle Block was blue checked for contact and installed to the Upper Half Casing.

Figure 2: New HP Nozzle Block installed

1.5. The new Lower Half HP Nozzle Block was shipped to site for contact check and installation by the PSG Turbine Field Service team.

The post Steam Turbine HP Nozzle Manufacturing first appeared on ユースカジノ 入金不要ボーナス.

With our 3D scanning technology we can send an engineer to your site, or send the component to our facility, and scan any component that you may need to purchase in the future.   We can offer quick turnaround times to scan and manufacture items made from standard materials during an outage, or acquire dimensional data to create drawings to manufacture a component for a future outage.

If you are looking for alternatives for your next major steam turbine component purchase please don’t hesitate to contact us and see if we can assist.

The post Steam Turbine Component Manufacturing first appeared on ユースカジノ 入金不要ボーナス.